TM 9-2320-273-20
WHEELS AND TIRES.
10-14. FRONT WHEEL BEARINGS AND SEALS MAINTENANCE (M916 THRU M920) (Continued).
LOCATION/lTEM
ACTION
REMARKS
C. PACKING AND INSTALLATION OF BEARINGS (Continued).
14.
15.
16.
Drive flange (11).
a. Coat inside surface with
silicone (RTV) gasket material.
b. Attach to hub with eight cap-
screws (13) and washers (12).
c. Install expansion plug (14),
if removed.
Eight capscrews (13)
Tighten to 175-205 Ib-ft (237-
and washers (12).
282 N•m) with torque wrench.
Tighten as shown.
Tire and wheel assembly
Install (refer to TM 9-2320-273-10).
Tighten wheel stud nuts (15) with
torque wrench to 450 Ib-ft (610 N•m),
in sequence shown.
Change 2 10-52.1/10-52.2 (blank)
