TM 9-2320-273-20
BRAKE SYSTEM.
9-32. FRONT BRAKE SHOES MAINTENANCE (M916 THRU M920) (Continued).
LOCATION/lTEM
ACTION
REMARKS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Two brake springs (7).
Two cotter pins (4).
Two nuts (2) and washers
(3).
Two springs (5).
Two plates (6).
Two pins (1).
Two brake shoes (8).
Guide (24), and (22), cap
(23), pawl (21), two guides
(25), and two lock plates
(26).
Two retainers (9), two springs
(10) and (11), two adjusting
bolts (12), two anchors (13),
two plungers (14), two
retainers (15), two seals (16),
and two plungers (17).
Remove with brake spring
pliers.
Remove and discard.
Remove.
Remove.
Remove.
Remove.
Remove.
Remove to provide access
to wedge cylinder parts.
Remove and clean; discard
seals (16).
Snap ring (18) and wedge (19). Remove for inspection.
Place notched tip of pliers
against hood on spring, un-
notched tip against inner ridge
of brake shoe (8), squeezing
pliers to stretch spring and
remove it from the notch.
Remove for inspection, not
normally needed unless trouble
is indicated.
Replace if damaged.
11. Brake springs (7), shoes (8),
Inspect for:
and all hardware.
a. Dirt.
b. Wear.
c. Damage.
Replace as necessary.
9-128
