TM 9-2320-273-20
BRAKE SYSTEM.
9-28. DOUBLE-CHECK AND STOPLAMP VALVE-MAINTENANCE (M918 AND M919) (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
3. Two terminal nuts (4).
Unscrew and remove two
Mark location for reassembly.
wires (3).
4. Double-check and stop-
Unscrew from bulkhead
lamp valve (6).
fitting (5).
5. Elbow (7).
Unscrew and remove from
tee (2).
B. INSTALLATION.
6. Elbow (7).
a. Coat threads with liquid
tefIon.
b. Screw into tee (2).
7. Double-check and stop-
a. Coat threads with liquid
lamp valve (6).
teflon.
b. Screw into bulkhead
fitting (5).
8. Tee (2).
a. Coat threads with liquid
teflon.
b. Screw into double-check
and stoplamp valve (6).
9. Fittings (1) and (8).
a. Coat threads with liquid
teflon.
b. Screw into tee (2) and
Install as previously marked.
elbow (7).
10. Two wires (3).
Install over terminals and
Install as previously marked.
secure with two terminal
nuts (4).
9-108
