TM 5-2330-325-13&P
0001
CORROSION PREVENTION AND CONTROL (CPC) - Continued
PITTING: This can result from conditions similar to those for crevice corrosion. Pits can develop on various
materials due to their composition. Rifle boxes are big victims of pitting.
EROSION: Results when a moving fluid (liquid or gas) flows across a metal surface, particularly when solid
particles are present in the fluid. Corrosion actually occurs on the surface of the metal, but the moving fluid
washes away the corrosion and exposes a new metal surface, which also corrodes.
FRETTING: Occurs as a result of small, repetitive movements (e.g., vibration) between two surfaces in contact
with each other. It s usually identified by a black powder corrosion product or pits on the surface.
GALVANIC: Occurs when two different types of metal come in contact with each other, like steel bolts on
aluminum, for example. This is a common problem on aircraft because of their mix of metals.
STRESS: Term used to describe corrosion cracking and corrosion fatigue.
Where an item is not ready/available due to one of these forms of corrosion, it shall be recorded as a corrosion
failure in the inspection record and the appropriate code (170) for corrosion shall be used when requesting/
performing maintenance.
SF Form 368, Product Quality Deficiency Report should be submitted to the address specified in DA PAM 750-8,
The Army Maintenance Management System (TAMMS) Users Manual.
DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE
For procedures for destruction of Army materiel to prevent enemy use, refer to TM 750-244-3.
PREPARATION FOR STORAGE OR SHIPMENT
For instructions on preparing the semitrailer for storage or shipment, refer to (WP 0092).
WARRANTY INFORMATION
The M870A3 has a one year limited warranty from Kalyn Siebert. The warranty begins on the date of delivery to
the United States Government. Kalyn Siebert parts are identified under Commercial and Government Entity Code
(CAGEC) 63576, located in the Repair Parts and Special Tools List (RPSTL) (WP 0097). Contact Kalyn Siebert at
1505 West Main Street, P.O. Box 1078 Gatesville, Texas U.S.A. 76528. Phone: 1-800-525-9689 or 254-865-7235
Fax: 254-865-7235 or www.kalyntx.com.
OFFICIAL NOMENCLATURE, NAMES, DESIGNATIONS, AND ABBREVIATIONS
NOTE
For standard abbreviations, refer to MIL-STD-12D.
Table 1.
Abbreviations List.
Abbreviation
Common Name
ACE
Advanced Collaborative Environment
AAL
Additional Authorization List
ABS
Anti-lock Braking System
BII
Basic Issue Item
BOI
Basis of Issue
