TB 9-2320-360-13&P-2
RIGHT CAB SIDE (REAR) ARMOR REPLACEMENT - CONTINUED
0028 00
INSTALLATION - CONTINUED
11.
Install spacer (12), grab handle (11), washer (13), bolt (14), washer (18), and new locknut (19). Tighten locknut to 55 lb-
ft (75 Nm).
12.
Install spacer (4), grab handle (11), washer (5), bolt (6), upper seat belt support (3), washer (2), and new locknut (1).
Tighten locknut to 7 lb-ft (10 Nm).
13.
Install spacer (8), washer (9), bolt (10), seat belt retractor (7), washer (22), and new locknut (23). Tighten locknuts to 35
lb-ft (48 Nm).
14.
Install four sleeve bushings (17), washers (16), bolts (15), washers (20), and new locknuts (21) on cab side (rear) armor
(24). Tighten locknuts to 35 lb-ft (48 Nm).
1,2
3
4
5
6
7
8
24
9
23
10
22
11
12
13
14
15
18
21 20 19
417-108
17
16
15.
Remove sling and lifting device from right cab side (rear) armor (24).
16.
Install wheel well armor (WP 0020 00).
END OF WORK PACKAGE
0028 00-7/(0028 00-8 Blank)