TB 9-2320-360-13&P-2
DOOR HANDLE ASSEMBLY REPLACEMENT - CONTINUED
0012 00
REMOVAL
1.
Remove spring (6) from door.
2.
Remove four locknuts (20), eight washers (21), four bolts (22), and door rod cover (12) from door. Discard locknuts.
3.
Remove two bolts (23),washers (24), and door handle (1) from door linkage rod (13) and standoff (5).
4.
Remove linkage clevis (7) from latch (8).
5.
Remove locknut (14), bolt (15), and door linkage rod (13) from cam control (16). Discard locknut.
6.
Loosen setscrew (17) and remove cam control (16) and five washers (18).
NOTE
Retain five washers inside spacer for installation.
7.
Remove four bolts (10), washers (11), and exterior door handle (9) from door.
8.
Remove door interior spacer (18) and linkage rod (13) from door.
9.
Remove two locknuts (2) four washer (3), two bolts (4), and standoff (5) from door. Discard locknuts.
7
6
8
5
9
2,3,4
1
10,11
23,24
20,21,22
12
13
19
14,15
417-128
16,17,18
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
0012 00-2