TB 9-2320-360-13&P-2
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
LOCATION
ITEM TO
ITEM
NOT FULLY MISSION
CHECK/
NO.
INTERVAL
PROCEDURE
CAPABLE IF:
SERVICE
6
Before
Side Armor a. Inspect side armor panels and door Any side armor panel or door assembly
(Right Side)
assembly for damage or loose or is damaged or mounting hardware is
missing mounting hardware.
loose or missing.
b.Inspect exterior surface of door ballis- Cracks, scratches or pitting in the exte-
tic glass for cracks, scratches or pit- rior layer of door ballistic glass that pen-
ting.
etrates through to the inner layer.
c. Open door and enter cab. Close door Door binds or does not latch or lock.
using grab handle. Lock door with
lock pin. Make sure door closes prop-
erly and locks correctly (WP 0004
d.Make sure door ballistic glass can Door ballistic glass will not close or
open, close and securely lock.
lock.
e. Inspect interior surface of door ballis- Cracks, scratches or pitting on the inte-
tic glass and windshield ballistic glass rior surface of the door ballistic glass or
for cracks, scratches, or pitting.
windshield ballistic glass.
f. If dirty, clean door ballistic glass (WP
7
Before
Escape
From inside the cab, check that escape Escape hatch will not latch closed or
Hatch
hatch is centered in opening and latches or latch mounting hardware is
securely latched closed. Ensure there is loose or missing.
no damage to latches and latch mount-
ing hardware (WP 0004 00).
8
Before
Doghouse
Remove rear access cover of doghouse Any doghouse armor plates are dam-
Armor
and inspect doghouse armor plates for aged or have loose or missing mounting
damage or loose or missing mounting hardware.
hardware.
9
Weekly
Front Sus-
Inspect front suspension springs and Any cracks, breaks, or loose hardware
pension
mounting hardware for cracks, breaks, or damage to suspension springs is
or loose or missing hardware and/or noted.
shackles. Notify your supervisor of any
damage found.
10
Weekly
Cab Mounts
Inspect front and rear cab mounts for
evidence of deterioration, over-com-
pression, or loose mounting hardware.
Notify your supervisor of any damage
or looseness found.
0009 00-5