TB 9-2320-360-13&P-1
A/C SWITCH WIRING HARNESS REPLACEMENT - CONTINUED
0051 00
INSTALLATION - CONTINUED
CAU T I ON
Ensure wire 1280 to alternator is loose enough to allow for alternator belt adjustment. Failure to follow this
caution may result in damage to equipment.
a.
Install wire 1280 (3), new lockwasher (11), and nut (10) to alternator positive (+) terminal (12) of
alternator (13).
b.
Feed wire 1280 (3) through tunnel and grommet (9) into bottom of electrical control box (8).
HETF00501
c.
Install wire 1280 (3), new lockwasher (2), and nut (1) to 24-vdc magnetic switch (R22) (4).
d.
Install wire 1280 (3) and cushion clamp (7) in bottom of electrical control box (8) with screw (5) and washer (6).
HETF00502
9.
Install plastic ties where needed to secure the A/C switch harness.
10.
Close doghouse door (WP 0028 00).
11.
Install dash access panel (TM 9-2320-360-20-2).
12.
Install electronic control box assembly covers (TM 9-2320-360-20-2).
13.
Connect batteries (TM 9-2620-360-20-2).
14.
Install alternator access panel (TM 9-2320-360-20-2).
15.
Remove wheel chocks (TM 9-2320-360-10).
END OF WORK PACKAGE
0051 00-8