TB 9-2320-360-13&P-1
A/C SWITCH WIRING HARNESS REPLACEMENT - CONTINUED
0051 00
REMOVAL
N OT E
Refer to WP 0057 00, Figure j., for electrical schematics.
Tag and mark all wires prior to removal.
Cut plastic ties as required.
1.
Open doghouse door (WP 0028 00).
2.
Remove wire 1280 from alternator and 24 vdc magnetic switch (R22).
a.
Remove nut (1), lockwasher (2), and wire 1280 (3) from 24 vdc magnetic switch (R22) (4). Discard lockwasher.
b.
Remove screw (5), washer (6), and cushion clamp (7) from electrical control box (8) and wire 1280 (3).
HETF00435
c.
Remove wire 1280 (3) back through grommet (9) in bottom of electrical control box (8).
d.
Remove nut (10), lockwasher (11), and wire 1280 (3) from alternator positive (+) terminal (12) of alternator (13).
Discard lockwasher.
HETF00436
3.
Remove A/C switch harness connector (14) from A/C evaporator connector (15).
4.
Remove A/C switch harness (16) from doghouse (17) and grommet (9) in electrical control box (8).
5.
Remove harness from 24 vdc magnetic switch (R22) (4).
0051 00-2