TB 9-2320-360-13&P-1
A/C BINARY SWITCH REPLACEMENT - CONTINUED
0044 00
REMOVAL - CONTINUED
N OT E
Tag and mark all wires prior to removal.
1.
Disconnect A/C binary switch connector (1) from wir-
ing harness and A/C binary switch (2).
2.
Remove A/C binary switch (2) from A/C receiver/
dryer (3).
HET143
INSTALLATION
WAR N I N G
Adhesives and sealing compounds can burn easily, can give off harmful vapors and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in well-ventilated areas. If adhesive or
sealing compound gets on skin or clothing, wash immediately with soap and water.
1.
Apply sealing compound to threads of A/C binary switch (2).
2.
Install A/C binary switch (2) on A/C receiver/dryer (3).
3.
Connect A/C binary switch connector (1) to wiring harness and A/C binary switch (2).
4.
Close hood (TM 9-2320-360-10).
5.
Remove wheel chocks (TM 9-2320-360-10).
END OF WORK PACKAGE
0044 00-2