TB 9-2320-335-13&P
24-18.1. REAR SUSPENSION FRONT CROSSMEMBER REPLACEMENT
(SERIAL NUMBERS 300000 AND ABOVE) (Cont'd)
b. Installation
1.
Install crossmember mount (17) on crossmember (6) with two washers (24), capscrew (23), washers (30),
and locknuts (31). Tighten locknuts (31) to 260 lb-ft (353 Nm).
2.
Secure crossmember mount (17) to crossmember (6) with washer (21), capscrews (22), washers (32),
and locknuts (33). Tighten locknuts (33) to 90 lb-ft (122 Nm).
3.
Slide crossmember mount (17) and crossmember (6) onto frame (14).
4.
Install reinforcement plates (10) and (11) and tiedown bracket (18) on frame (14) with four washers (12),
capscrews (13), washers (19), and locknuts (20).
5.
Install radius rod (27) on crossmember mount (17) with washer (28), capscrew (29), washer (26), and
locknut (25). Tighten locknuts (25) to 260 lb-ft (353 Nm).
6.
Secure tiedown bracket (18) to crossmember mount (17) with vent line bracket (9), two washers (7),
capscrews (8), washers (15), and locknuts (16).
7.
Install vent line (5) on crossmember (6) with two clamps (4) and (2) and capscrews (3) and (1).
24-28
