TB 9-2320-335-13&P
8-24.2. POWER STEERING HYDRAULIC SYSTEM PRESSURE AND RETURN HOSES
REPLACEMENT (SERIAL NUMBERS 300000 AND ABOVE) (Cont'd)
18.
Loosen clamp (2) and remove return hose (3) from outlet tube (1) of oil cooler (7).
19.
Loosen clamp (5) and remove return hose (4) from inlet tube (6) of oil cooler (7).
20.
Loosen nut (17) and disconnect pressure hose (8) from steering gear inlet adapter (16).
21.
Remove steering gear inlet adapter (16) and O-ring (15) from steering gear (14). Discard O-ring (15).
22.
Loosen nut (11) and disconnect return hose (3) from steering gear outlet adapter (12).
23.
Remove steering gear outlet adapter (12) and O-ring (13) from steering gear (14). Discard O-ring (13).
24.
Loosen clamp (9) and disconnect return hose (3) from 90 fitting (10).
b. Installation
1.
Connect return hose (3) on 90 fitting (10) with clamp (9).
2.
Install steering gear outlet adapter (12) and O-ring (13) on steering gear (14).
3.
Connect return hose (3) on steering gear outlet adapter (12) and tighten nut (11).
4.
Install steering gear inlet adapter (16) and O-ring (15) on steering gear (14).
5.
Connect pressure hose (8) on steering gear inlet adapter (16) and tighten nut (17).
6.
Install return hose (4) on inlet tube (6) of oil cooler (7) and tighten clamp (5).
7.
Install return hose (3) on outlet tube (1) of oil cooler (7) and tighten clamp (2).
8-26