TB 9-2320-335-13&P
8-4.1. RADIAL TIRE, WHEEL, AND RUBBER RUNFLAT MAINTENANCE (24-STUD) (Cont'd)
WARNING
Never inflate a wheel assembly with the wheel locknuts removed
in an attempt to separate inner and outer rim halves. The
assembly will separate under pressure, resulting in serious injury
or death.
3.
Remove outer rim half (1) from tire (6).
4.
Remove insert (8) and locknut (10) from outer rim (1). Discard locknut (10).
5.
Remove O-ring (9) from insert (8). Discard O-ring (9).
6.
Remove O-ring seal (3) from inner rim half (5). Cut O-ring seal (3) in two to make sure it cannot be
reused. Discard O-ring seal (3).
7.
Remove tire (6) from inner rim half (5).
8.
Remove balance weights (4) from rim halves (1) and (5), if present. Discard balance weights (4).
2
1
6
7
8
1
9
3
10
5
4
8-3