TB 9-2320-302-13&P-2
3.) Release seal in weather stripping by
4.) If weather stripping appeared on the
using a flat headed screwdriver and
inside of glass, push glass from
wedging it in the split.
outside of the truck to the inside of
the truck cab. If the weather
*Note: seam that needs to be released
stripping appeared on the outside of
the cab push glass
may appear inside or outside
from inside the cab to outside.
of vehicle.
* Picture demonstrates stripping on inside and
window pushed from outside the truck to
inside cab.
FENDER AND MUD FLAP REMOVAL
REQUIRED TOOLS:
9/16" Socket with Ratchet Driver
9/16" Wrench
Remove the fenders from the truck to facilitate installation
of the wheel well blast deflectors
1.) Loosen and remove bolts on top of
fender and inside of fender.
2.) Remove front mud flaps by extracting bolts.
* Save the fenders and mounting hard ware for
later re-installation.
ArmorWorks
0038 00-16