TB 9-2320-302-13&P-2
RIGHT B-PILLAR ARMOR REPLACEMENT - CONTINUED
0023 00
REMOVAL - CONTINUED
8.
Remove two bolts (36), wires (37), washers (38), and lockwashers (39) from work light connector (35). Discard lock-
washers.
9.
Remove two rivets (34) and work light connector (35) from B-pillar armor frame (33). Discard rivets.
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
10.
Install two lifting links on two weld bosses (27).
28,29,30,31,32
27
(HIDDEN)
11.
Attach lifting device to two lifting links on B-pillar
armor frame (33).
12.
Using lifting device, hold B-pillar (33) suspended and
remove two locknuts (28), washers (29), bolts (32),
washers (30), lockwashers (31), and B-pillar (33) from
vehicle. Discard lockwashers and locknuts.
13.
Remove lifting device from B-pillar armor frame (33).
14.
Remove two lifting links from two weld bosses (27).
33
34
440-030
36,37,38,39
35
0023 00-4