TB 9-2320-302-13&P-2
RIGHT B-PILLAR ARMOR REPLACEMENT - CONTINUED
0023 00
REMOVAL
1.
Remove four nuts (1), washers (2), two saddle clamps (4), and exhaust stack (3).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
2.
Using a lifting device, support muffler (5) and loosen
3
two bolts (7) on seal clamp (6).
4
1,2
5
3.
Using a lifting device, remove four nuts (9), washers
(10), two saddle clamps (8), muffler (5), and seal
clamp (6).
4.
Discard seal clamp (6). Remove lifting device from
muffler.
5.
Remove four nuts (11), lockwashers (12), washers
(13), and rear cab grab handle with adapter plates (14)
from rear cab armor frame. Discard lockwashers.
6
14
11,12,13
7
440-028
9,10
8
0023 00-2