TB 9-2320-279-13&P
0040
Install four spacers (14), washers (15), screws (16), washers (17), and locknuts (18) in rear tank
mounting bracket (9) and frame mounting bracket (4). Do not tighten locknuts.
Compress springs on both left and right front tank mounts 3-5/8 in. 1/8 in. (92 mm 3 mm).
Tighten three locknuts (13) on front tank mounting brackets (2).
Tighten four locknuts (18) on rear frame mounting brackets (4). Torque to 150 lb-ft (203 Nm).
Soldier A holds eight screws (5) while Soldier B tightens nuts (6) behind rear frame mounting bracket (4).
0040-97