TB 9-2320-279-13&P-3
0029
REMOVAL
NOTE
Both left side high mount stop light and right side high mount stop light are removed the
same way. Right side high mount stop light shown.
Remove cable ties as required.
1. Disconnect stop lamp harness connector (1) from stop lamp extension harness (2).
2. Remove two screws (3), lockwashers (4), loop straps (5), and one stop lamp extension harness (2) from
rear door assembly (6). Discard lockwashers.
3. Remove two screws (7), lockwashers (8), and one high mount stop light (9) from rear door assembly (6).
Discard lockwashers.
4. Disconnect stop lamp extension harness connector (10) from high mount stop light (9).
5. Remove stop lamp extension harness (2) through front side of rear door assembly (6) and lamp
housing (11).
END OF TASK
0029-2