• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
LOWER SIDE PANEL ASSEMBLY REPLACEMENT - Continued
LOWER SIDE PANEL ASSEMBLY REPLACEMENT - Continued

Hemtt Tanker Armor Module Kit 5Sk319 Kit, Armor, Tan 5Sk320 Kit, Armor, Green Page Navigation
  55    56    57    58    59  60  61    62    63    64    65  
img
TB 9-2320-279-13&P-3
0017
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device used is in suitable load capacity.
Keep clear of heavy parts supported only by lifting device. Failure to follow this warning may
cause injury or death to personnel.
NOTE
Both left lower side panel assembly and right lower side panel assembly are installed the
same way. Left lower side panel assembly is shown.
Lower side panel assembly weighs 105 lbs (48 kg).
1. Attach sling and lifting device to lower side panel assembly (4).
2. Use lifting device to position lower side panel assembly (4) on rear panel assembly (16).
3. Route wire harness (9) through hole near upper rear corner of lower side panel assembly (4).
0017-4


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.