TB 9-2320-279-13&P-3
0017
REMOVAL - CONTINUED
6. Remove two screws (17), lockwashers (18), washers (19), and locknuts (20) from lower side panel
assembly (4) and front panel assembly (21). Discard lockwashers and locknuts.
7. Route wire harness (9) through hole near upper rear corner of lower side panel assembly (4).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device used is in suitable load capacity.
Keep clear of heavy parts supported only by lifting device. Failure to follow this warning may
cause injury or death to personnel.
NOTE
Lower side panel assembly weighs 105 lbs (48 kg).
8. Attach sling and lifting device to lower side panel assembly (4).
9. Using lifting device, remove lower side panel assembly (4) from rear panel assembly (16).
END OF TASK
0017-3