TB 9-2320-279-13&P-2
REAR CAB (RIGHT) ARMOR REPLACEMENT - CONTINUED
0025 00
REMOVAL - CONTINUED
3.
Slide tire carrier (1) away from rear window.
4.
If equipped with 4-point seat belts, remove three locknuts (14), washers (15), and seat belt bracket (18). Discard lock-
nuts.
5.
Install lifting link, sling, and lifting device in center hole of right-rear cab armor (13).
6.
Remove 12 locknuts (9), washers (10), bolts (11), and washers (12) from right-rear cab armor (13). Discard locknuts.
7.
Loosen 12 bolts (16) and remove four brackets (17) from rear window opening.
14,15
9,10,11,12
1
13
16
17
18
417-034
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
N OT E
Rear cab (right) armor weighs 100 lb (46 kg).
8.
Using lifting device, remove right-rear cab armor (13) from vehicle.
9.
Remove lifting device, sling, and lifting link from right-rear cab armor (13).
0025 00-2