TM 9-2320-363-34-1
DASHBOARD REPLACEMENT (CONT)
NOTE
Procedure is the same for both vehicles except as noted.
Tag all connectors, cables, and air lines prior to removal to aid in installation.
Quantity of tie wraps may vary from zero to several. Remove as necessary.
1.
DISCONNECT CONNECTOR (1) FROM FIREWALL (2).
2.
LOOSEN TWO SCREWS (3) AND DISCONNECT TWO CONNECTORS (4) FROM FIREWALL (2).
C A U T I O N
Make sure all connectors are properly tagged. Failure to do so could result in
electrical damage to equipment.
3.
REMOVE TWO NUTS (5) AND DISCONNECT TWO CABLES (6).
10-4