TM 9-2320-363-34-1
Use general cleaning methods to clean all parts (page 2-30).
Inspect all parts for wear or damage.
NOTE
Procedure is the same for both cross tube arms.
1.
INSTALL WOODRUFF KEY (4), CROSS TUBE ARM (3), AND CASTELLATED NUT (2). TIGHTEN
CASTELLATED NUT TO 550-740 LB-FT (746-1003 N.m).
C A U T I O N
Castellated nut may be tightened to 1,025 Ib-ft (1390 N.m) for purpose of
installing cotter pin. Overtightening may damage steering arm.
2.
INSTALL NEW COTTER PIN (1).
NOTE
Follow-on Maintenance:
Install tie rod (page 5-52).
5-59