ROCKER COVER REPLACEMENT (CONT)
W A R N I N G
Adhesives, solvents, and sealing compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or clothing, wash immediately with
soap and water.
APPLY SMALL FILLET OF RTV SEALANT IN FRONT AND REAR CORNERS (9) OF CYLINDER
HEAD (10) WHERE FRONT AND REAR CAM CAPS ARE LOCATED ON CYLINDER HEAD.
C A U T I O N
Handle rocker cover carefully, Dropping or bumping may cause unrepairable
POSITION ROCKER COVER (5) ON CYLINDER HEAD (10).
INSTALL FOUR ISOLATORS (11), FOUR WASHERS (12), AND FOUR BOLTS (13) THRU HOLES IN
ROCKER COVER (5).