ROCKER COVER REPLACEMENT (CONT)
CLEAN ROCKER COVER GASKET (1), FOUR ISOLATORS (2), AND TWO ROCKER COVER PLUGS
(3) WITH MILD SOAP AND WATER AND DRY WITH COMPRESSED AIR. DISCARD IF DAMAGED.
CLEAN ALL OLD RTV SEALANT FROM ROCKER COVER GROOVES. CLEAN ALL DIRT AND
FOREIGN MATTER FROM ROCKER COVER (4) AND ROCKER COVER HOLDDOWN BOLT
W A R N I N G
Adhesives, solvents, and sealing compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or clothing, wash immediately with
soap and water.
CLEAN BREATHER ELEMENT
REMOVE OLD RTV SEALANT
REAR CAM CAP AREA.
(MESH) (6) WITH SOLVENT AND DRY WITH COMPRESSED AIR.
FROM CORNERS OF CYLINDER HEAD LOCATED AT FRONT AND