TM 9-2320-302-34
0080 00-32
FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0080 00
ASSEMBLY - CONTINUED
84.
Install yoke (9), an 0.5-in (12.7 mm) assembly spacer (70), and lock nut (8). Hand tighten lock nut.
85.
Install bearing cone (25) on side gear (24).
86.
Rotate differential carrier (1) so that ring gear (2) is toward floor.
87.
Install bearing cup (28) in differential carrier (1).
88.
Install fork (27), clutch (26), and side gear (24) in differential carrier (1).
89.
Install spring (23) in differential carrier (1).
90.
Install jamnut (22) and adjusting screw (21) in differential carrier (1).
91.
Install shift shaft (20), new seal (19), cover (18), and four socket head screws (17). Tighten screws to 49-76 lb-in (5.5-
8.5 Nm).
70
9
8
25
24