TM 9-2320-302-34
0080 00-16
FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0080 00
ASSEMBLY - CONTINUED
8.
Install differential carrier (1) on press with legs of differential carrier toward top of press.
NOTE
If installing new ring gear and drive pinion, use shim pack thickness determined in step 5 or 6. If installing
same ring gear and drive pinion, use shim pack removed in Disassembly step 48.
9.
Install shim pack (63). Using press, install inner bearing cup (62) in differential carrier (1) until bottom of inner bearing
cup touches shim pack.
10.
Turn differential carrier (1) over and install supports so that differential carrier is level on press.
11.
Using press, install outer bearing cup (61) until bottom of outer bearing cup touches bottom of bore.
12.
Install drive pinion (3) from bottom of differential carrier (1). Install support under head of drive pinion.
62
63
1
61
1