TM 9-2320-302-34
0029 00-11
OIL PUMP MAINTENANCE - CONTINUED
0029 00
ASSEMBLY - CONTINUED
CAUTION
Minimum press force of 1515 lb (7.0 kN) must be obtained to press oil pump drive gear onto oil pump
drive gear and shaft assembly, to prevent equipment damage.
Balance holes in drive gear rim must face pump body to avoid possibility of installing drive gear back-
wards.
18.
Place end of internal oil pump drive gear and shaft assembly (22) on press support. Press oil pump drive gear (23) on oil
pump drive gear and shaft assembly. Using feeler gage, ensure that clearance of 0.033-0.044 in (0.84-1.12 mm) is
obtained between oil pump drive gear and oil pump body (20).
23
20
24
23
24
20
22