TM 9-2320-302-34
0013 00-4
FAN DRIVE SUPPORT REPLACEMENT - CONTINUED
0013 00
INSTALLATION - CONTINUED
2.
Install five adjustable idler gear cover bolts (9) hand tight.
3.
Install short bolt (7) through bottom hole in fan support bracket (3) and long bolt (8) through right hand bolt hole.
Tighten bolts to 118-148 lb-ft (160-200 Nm).
4.
Install two bolts (6) through bolt holes at top of fan support bracket (3). Tighten bolts to 43-54 lb-ft (58-73 Nm).
5.
Tighten five adjustable idler gear cover bolts (9) to 22-28 lb-ft (30-38 Nm).
6.
Install bolt (5) through top left hand bolt hole in fan support bracket (3) and through gear housing stabilizer bracket.
7.
Install nut (4) and tighten bolt (5) to 43-54 lb-ft (58-73 Nm).
9
3
6
7
8