TM 9-2320-302-34
0012 00-3
REAR ENGINE MOUNTS REPLACEMENT - CONTINUED
0012 00
REMOVAL - CONTINUED
8.
Remove six nuts (26), washers (27), screws (28), washers (29), and rear engine mount (5) from frame rail (25).
9.
Repeat steps 5 through 8 for right side.
INSTALLATION
WARNING
Engine weighs 2850 lb (1294 kg). Use hoist with lifting capacity of 5000 lb (2270 kg) to lift and support
engine. Failure to do so could result in injury to personnel.
1.
On right side, install rear engine mount (5), six washers (29), screws (28), washers (27), and nuts (26) on frame rail (25).
2.
On right side, install two isolators (23) and washers (22) in rear engine mount (5).
3.
On right side, install rear engine leg (20), two screws (19), washers (18), and screws (17) in flywheel housing (21).
4.
Repeat steps 1 through 3 for left side.
5.
Remove jack stands from cab mounts (24).
6.
On left side, install two washers (4), screws (3), washers (2), and nuts (1) hand-tight in rear engine mount (5).
7.
On right side, install washer (15), bracket (11), two screws (14), washers (13), and nuts (12) on rear engine mount (5).
8.
Lower engine (16) onto engine mounts and tighten four nuts (1 and 12) on left and right sides.
9.
On right side, install clamp (10), washer (9), screw (8), clamp (7), and new lock nut (6) on bracket (11).
END OF WORK PACKAGE
24
25