FRONT GLADHANDS REPLACEMENT - CONTINUED
INSTALLATION - CONTINUED
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.
Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not enter air
lines or fittings. Failure to follow this warning could result in injury to personnel or damage to equip-
Lightly coat threads of two bulkhead fittings (12) with pipe sealing compound. Install bulkhead fittings on gladhands
Install mounting bracket (6) on bumper (11) with two washers (10), screws (9), washers (8), and new lock nuts (7).
Install two gladhands (5) on mounting bracket (6) with two new lock washers (4) and nuts (3).
Lightly coat threads of two elbows (2) with pipe sealing compound. Install elbows on two bulkhead fittings (12).
Conect two tubes (1) to elbows (2).
Start vehicle and build air pressure (TM 9-2320-302-10). Check for leaks.
END OF WORK PACKAGE