7. Rotate control arm in direction away from adjusting hex (toward brake chamber) until the positive in-
ternal stop (full release position) is contacted. Do not hammer on control arm, as internal damage may result.
Figure 2 Position control Arm and Anchor bracket
H o l d i n g control arm in full release position, place anchor bracket on the threaded stud in control arm and
loose assemble with flat washer, lock washer and nut. Assemble bracket to stationary member. Rotate control
a r m (A) away from adjusting hex to the full release position. Making certain control arm does not move,
tighten all fasteners.
Figure 3 Studded Control Arm