TM 9-2320-363-34-2
GEAR END REPAIR (CONT)
Use general cleaning methods to clean all parts (page 2-30).
1.
Inspect gear teeth on shaft, ring gears, and planetary gear for chips, uneven wear, or damage.
Replace if damaged.
2.
Inspect housing bores for pitting or corrosion. Replace if damaged.
Use general repair methods to repair damaged parts (page 2-33).
1.
INSTALL
2.
INSTALL
PLANETARY GEAR (1) AND RETAINING RING (2) ON SHAFT (3).
NEW GASKET (4) AND RING GEAR (5) OVER PLANETARY GEAR (1).
23-30
