TM 9-2320-363-34-2
20.
21.
22.
INSTALL THREE CRANKSHAFT GEAR REMOVER/INSTALLER LEGS (16) IN THREADED HOLES IN
CRANKSHAFT TIMING GEAR (15). TIGHTEN THREE REMOVER/INSTALLER LEGS (16).
INSTALL CRANKSHAFT GEAR REMOVER/lNSTALLER PRESSURE PLATE (17) ON THREE
REMOVER/INSTALLER LEGS (16). SEAT REMOVER/INSTALLER PRESSURE PLATE (17) AGAINST
REMOVER/INSTALLER LEG(16) FLANGES.
INSTALL THREE CRANKSHAFT GEAR REMOVER/INSTALLER RETAINING NUTS (18) ON THREE
REMOVER/INSTALLER LEGS (16). THREAD RETAINING NUTS (18) PAST FIRST SET OF
REMOVER/INSTALLER LEG (16) THREADS. SLIDE RETAINING NUTS (18) PAST UNTHREADED
PORTION OF SHAFTS AND ENGAGE SECOND SET OF THREADS. TIGHTEN RETAINING NUTS
(18).
12-59
