TM 9-2320-363-34-2
FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR (CONT)
12.
13.
14.
15.
ROTATE DIFFERENTIAL CARRIER (1) UNTIL YOKE (9) FACES UP AND INSTALL SUITABLE
LIFTING DEVICE THRU YOKE (9).
NOTE
There are two notches on side of pinion differential case. When one is alined
with helical driven gear, pinion differential case can be removed.
ROTATE INPUT SHAFT (13) UNTIL ONE NOTCH ON PINION DIFFERENTIAL CASE (14) IS ALlNED
OVER HELlCAL DRIVEN GEAR (15).
LIFT INPUT SHAFT (13) FROM DIFFERENTIAL CARRIER (1).
REMOVE SHIMS (16). MEASURE AND RECORD THICKNESS OF SHIM PACK.
17-6