TM 9-2320-363-34-2
1.
2.
3.
4.
5.
6.
7.
8.
9.
INSTALL SELECTOR VALVE (1) IN CONTROL
VALVE BODY (2).
INSTALL CONTROL VALVE BODY (2) AND OIL TRANSFER PLATE (3) IN TRANSMISSION
HOUSING (4), MAKING SURE SHIFT RACK PIN (5) ENGAGES SLOT ON SELECTOR VALVE (1).
INSTALL THREE SCREWS (6) IN CONTROL VALVE BODY (2).
INSTALL SEVEN SCREWS (7).
INSTALL TWO SCREWS (8) AND TWO WASHERS (9).
INSTALL 15 SCREWS (10) IN CONTROL VALVE BODY (2).
INSTALL MANUAL DETENT LEVER (11) AND SCREW (12) IN CONTROL VALVE BODY (2).
INSTALL OIL BAFFLE (13) AND TWO SCREWS (14).
TIGHTEN SCREWS (6, 7, 8, 10, 12, AND 14) TO 108-132 LB-IN. (12-15 N.m).
NOTE
Follow-on Maintenance:
Install lockup cutoff control valve (page 3-262).
Install modulator valve (page 3-261).
14-95
