TM 9-2320-363-34-1
W A R N I N G
Wear protective gloves when handling glass. Failure to do so could result in
injury to personnel.
C A U T I O N
When handling windshield glass, be careful not to nick or splinter edges of
glass. Chipped edges could cause cracking later.
Do not use windshield sealant. Windshield sealant compounds are not needed
and, if applied unevenly, can cause leaks resulting in water damage.
NOTE
Manufacturer’s ID number must be at lower center corner of windshield
glass when installed.
If installing windshield glass only, perform steps 1 thru 7. If installing seal
or windshield glass and seal, perform steps 8 thru 23.
Steps 1 thru 7 are the same for each windshield glass.
1.
LUBRICATE WINDOW CHANNEL OF SEAL (1) WITH SOAP AND WATER SOLUTION.
2.
SLIDE WINDSHIELD GLASS (2) INTO WINDOW CHANNEL OF SEAL (1) AS FAR AS IT WILL GO
WITHOUT FORCING.
10-57
