TM 9-2320-363-34-1
NOTE
Perform step 6 on left side.
6.
REMOVE LOCK NUT (17), WASHER (18), AND SCREW (19), DISCONNECT CABLE (20) AND SET
ASIDE. DISCARD LOCK NUT.
7.
REMOVE NUT (21), WASHER (22), AND BUSHING (23).
W A R N I N G
Cab assembly weighs 1,100 lb (499 kg). Use hoist with lifting capacity of
1,400 lb (636 kg) to support cab assembly. Failure to do so could result in
injury to personnel and/or damage to cab assembly.
8.
USING CAB SLING AND HOIST, LIFT CAB ASSEMBLY (24) JUST ENOUGH TO REMOVE ALL
SLACK AND NOT ALLOW CAB ASSEMBLY (24) TO DROP WHEN FRONT CAB MOUNTS (25) ARE
REMOVED.
9.
REMOVE SCREW (26), BUSHING (27), AND WASHER (28).
10. REMOVE FOUR NUTS (29), FOUR WASHERS (30), FOUR SCREWS (31), FOUR WASHERS (32),
AND FRONT CAB MOUNT (25).
10-43
