TM 9-2320-363-34-1
A I R D U C T S R E P L A C E M E N T
This task covers:
a. Removal b. Cleaning
c. Inspection d. Installation
Applicable Configuration:
Equipment Condition:
All except M915A2 and M916A1
Reference
Condition Description
Tools and Special Equipment:
Page 10-3
Dashboard Removed
Tool Kit. SC 5180-90-CL-N26
1.
2.
REMOVE EIGHT RETAINERS (1) AND FOUR AIR CYLINDERS (2).
REMOVE TWO SELF-TAPPING SCREWS (3) AND SEPARATE FLEX TUBING (4) FROM DUCT
(5).
3.
4.
5.
6.
7.
REMOVE TWO SCREWS (6), DUCT OUTLET (7), AND DUCT (5).
REMOVE TWO SELF-TAPPING SCREWS (8), DUCT (9), AND FLEX TUBING (4).
REMOVE FIVE CLIPS (10) AND SEPARATE FLEX TUBING (4) FROM DUCT (9).
REMOVE HOSE CLAMP (11), FLEX TUBING (12), AND DUCT OUTLET (13).
REMOVE TWO SELF-TAPPING SCREWS (14) AND SEPARATE FLEX TUBING (12) FROM DUCT
OUTLET (13).
8.
REMOVE SELF-TAPPING SCREW (15), SPEED NUT (16), AND OUTLET DUCT (17) FROM DUCT
(18).
9.
REMOVE SELF-TAPPING SCREW (19), WASHER (20), SPRING NUT (21), AND DUCT (18).
10.
REMOVE SCREW (22), VENT (23), AND GASKET (24).
11.
REMOVE THREE SELF-TAPPING SCREWS (25) AND FACE DUCT (26).
Use general cleaning methods to clean all parts (page 2-30).
10-39.0 Change 1
