TM 9-2320-363-34-1
MIDSHIPS ALLIGATOR CROSSMEMBER REPLACEMENT (CONT)
Use general cleaning methods to clean all parts (page 2-30).
Inspect all pads for wear or damage.
NOTE
Procedure is done on right side of vehicle.
1.
INSTALL MIDSHIPS ALLIGATOR CROSSMEMBER (1) AT ANGLE OPPOSITE OF HYDRAULIC
SPREADER BETWEEN TWO FRAME RAILS (2 AND 3).
2.
SLOWLY RELEASE PRESSURE ON HYDRAULIC SPREADER, AND AT SAME TIME, KEEP
MIDSHIPS ALLIGATOR CROSSMEMBER (1) ALlNED WITH TWO FRAME RAILS (2 AND 3).
3.
REMOVE HYDRAULIC SPREADER FROM TWO FRAME RAILS (2 AND 3).
4.
INSTALL EIGHT WASHERS (4), EIGHT CAPSCREWS (5), EIGHT WASHERS (6), AND EIGHT NUTS
(7) ON MIDSHIPS ALLIGATOR CROSSMEMBER (1) AND TWO FRAME RAILS (2 AND 3).
8-50
