TM 9-2320-363-34-1
Following procedure is done on right side of vehicle.
1.
INSTALL CAB ALLIGATOR CROSSMEMBER (1) AT ANGLE OPPOSITE OF HYDRAULIC SPREADER
BETWEEN FRAME RAILS (2 AND 3).
2.
SLOWLY RELEASE PRESSURE ON HYDRAULIC SPREADER, AND AT SAME TIME, KEEP CAB
ALLIGATOR CROSSMEMBER (1) ALINED WITH FRAME RAILS (2 AND 3).
3.
REMOVE HYDRAULIC SPREADER FROM FRAME RAILS (2 AND 3).
4.
5.
INSTALL FOUR WASHERS (4), FOUR CAPSCREWS (5), FOUR WASHERS (6), AND FOUR NUTS
(7) ON CAB ALLIGATOR CROSSMEMBER AND FRAME RAILS (2 AND 3).
INSTALL SIX WASHERS (8), SIX CAPSCREWS (9), SIX WASHERS (10), AND SIX NUTS (11) AT
SUSPENSION CROSSMEMBER (12).
8-33
