TM 9-2320-363-34-1
REAR CROSSMEMBER ASSEMBLY REPLACEMENT (CONT)
W A R N I N G
Rear crossmember weighs 460 lb (209 kg). Use hoist with lifting
capacity of 600 (272 kg) to install rear crossmember. Failure to do so
could result in injury to personnel.
3.
ATTACH HOIST AND INSTALL TWO SPACERS (13), REAR CROSSMEMBER (14), FOUR
WASHERS (15), FOUR SCREWS (16), FOUR WASHERS (17), AND FOUR NEW LOCK NUTS (18).
4.
INSTALL SPACER (19), LEFT SIDE GUSSET (20), FIVE WASHERS (21), FIVE SCREWS (22),
FIVE WASHERS (23), AND FIVE NEW LOCK NUTS (24).
5.
6.
REPEAT STEP 4 FOR RIGHT SIDE GUSSET (25).
MOVE WIRE/HOSE HARNESS (26) INTO POSITION AND INSTALL THREE CLAMPS (27) AND
THREE NEW LOCK NUTS (28).
NOTE
Follow-on Maintenance:
Install rear tiedown (TM 9-2320-363-20)(M917A1 and M917A1 w/MCS).
Install rear tiedown and roller (TM 9-2320-363-20) (M916A1 and M916A2).
Install grate (TM 9-2320-363-20)(M916A1 and M916A2).
Install pintle hook (TM 9-2320-363-20).
Install taillight brackets (TM 9-2320-363-20).
8-24
Change 1
