TM 9-2320-363-34-1
REAR CROSSMEMBER ASSEMBLY REPLACEMENT (CONT)
1.
REMOVE FOUR LOCK NUTS (1) AND FOUR CLAMPS (2) AND SET WIRING HARNESS (3) ASIDE.
DISCARD LOCK NUTS.
2.
REMOVE EIGHT NUTS (4), FOUR WASHERS (5), TOWING BRACKET (6), FOUR SCREWS (7),
FOUR WASHERS (8), AND REINFORCEMENT ASSEMBLY (9).
3.
REMOVE FIVE NUTS (10), FIVE WASHERS (11), FIVE SCREWS (12), FIVE WASHERS (13), TWO
SPACERS (14), AND LEFT SIDE GUSSET (15).
4.
REPEAT STEP 3 FOR RIGHT SIDE GUSSET (16).
W A R N I N G
Plate weighs 96 lb (44 kg). Use hoist with lifting capacity of 200 lb (91 kg)
to remove plate. Failure to do so could result in injury to personnel.
5.
ATTACH HOIST AND REMOVE 12 NUTS (17), 12 WASHERS (18), 12 SCREWS (19), 12 WASHERS
(20), AND PLATE (21).
8-16
