TM 9-2320-363-34-1
W A R N I NG
Axle housing is heavy and can injure personnel if dropped. Support axle
housing during removal.
NOTE
Procedure is the same for all rear axles except where noted.
1.
DISCONNECT TWO AIR LINES (1) FROM BRAKE CHAMBER (2).
NOTE
Note position of brake spider prior to removal to aid in installation.
2.
REMOVE 16 LOCK NUTS (3), 16 WASHERS (4), 16 SCREWS (5), 16 WASHERS (6), AND SPIDER
ASSEMBLY (7) FROM AXLE HOUSING (8). DISCARD LOCK NUTS.
3.
REPEAT STEPS 1 AND 2 FOR OPPOSITE SIDE OF AXLE HOUSING (8).
6-23