TM 9-2320-363-34-1
FRONT BALL, BUSHING, AND OIL SEAL REPLACEMENT (CONT)
2.
3.
SUPPORT AXLE BALL (2) ON BLOCKS TO PROTECT SEAL END OF ASSEMBLY.
INSTALL AXLE BALL BUSHING (3) IN AXLE BALL (2) SO GREASE SLOTS (4) ARE ALlNED WITH
TRUNNION HOLES (5) AND OPEN ENDS OF GREASE SLOTS (4) FACE UP.
W A R N I N G
Adhesives, solvents, and sealant compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in well-ventilated area. If adhesive,
solvent, or sealant compound gets on skin or clothing, wash immediately with
soap and water.
4.
COAT MOUNTING FACE OF AXLE HOUSING ASSEMBLY (6) WITH SILICONE ADHESIVE-SEALANT.
5-32
