TM 9-2320-363-34-1
F R O N T A X L E S H A F T R E P L A C E M E N T A N D R E P A I R ( C O N T )
10.
11.
12.
13.
14.
15.
APPLY SILICONE ADHESIVE-SEALANT TO UNDERSIDE OF HEADS OF IO CAPSCREWS (6)
AND APPLY LOCTITE 242 TO THREADS OF CAPSCREWS.
INSTALL 10 CAPSCREWS (6) AND TIGHTEN TO 185-190 LB-FT (251-257 N.m).
APPLY THIN COAT OF GREASE TO BEARING AND SEAL SURFACES OF AXLE SKEIN (5).
NOTE
Perform steps 13 thru 15 for M917A1 and M917A1 w/MCS.
INSTALL ELBOW (7) TO SKEIN (5) AND CONNECT CTIS VENT TUBE (8).
INSTALL NEW SEAL RING (9) AND MANIFOLD BLOCK (10) TO SKEIN (5) WITH TWO NEW LOCK
WASHERS (11) AND SCREWS (12).
INSTALL ADAPTER (13) TO MANIFOLD BLOCK (10) AND CONNECT CTIS TUBE (14).
NOTE
Follow-on Maintenance:
Install front slack adjuster and S-cam (TM 9-2320-363-20).
Fill axle with oil (TM 9-2320-363-20).
5-14
Change 1