TM 9-2320-363-34-1
F R O N T A X L E S H A F T R E P L A C E M E N T A N D R E P A I R ( C O N T )
NOTE
l
Procedure is the same for both right and left axle shafts and cage ring
assemblies. Right side is shown.
l
Perform steps 1 thru 3 for M917A1 and M917A1 w/MCS.
1.
DISCONNECT CTIS TUBE (1) FROM ADAPTER (2) AND REMOVE ADAPTER FROM
MANIFOLD BLOCK (3).
2.
REMOVE TWO SCREWS (4), LOCK WASHERS (5), MANIFOLD BLOCK (3) AND SEAL RING
(6) FROM SKEIN (7). DISCARD LOCK WASHERS AND SEAL RING.
3.
DISCONNECT CTIS VENT TUBE (8) FROM ELBOW (9) AND REMOVE ELBOW FROM SKEIN
(7).
4.
MATCHMARK AXLE SKEIN (7), BRAKE SPIDER (IO), AND BALL SOCKET (11).
5.
REMOVE 10 CAPSCREWS (12) FROM AXLE SKEIN (7), BRAKE SPIDER (10), AND BALL
SOCKET (11).
5-8
Change 1
