TM 9-2320-363-34-1
NOTE
l Wiring harness and leads are secured in place by clips, wire ties, cushion
clamps, and screw terminals.
l Only remove hardware securing harness or lead to be removed.
1.
DISCONNECT RELAY AND FUSE PANEL (1).
2.
DISCONNECT 42-PIN CONNECTOR (2), 34-PIN CONNECTOR (3), 32-PIN CONNECTOR (4), 6-PIN
SEALED CONNECTOR (5), AND FOUR RING TERMINALS (6).
3.
DISCONNECT THREE RING TERMINALS (6), 12-PIN CONNECTOR (7), FEMALE TERMINAL BLADE
(8), 6-PIN FEMALE CONNECTOR (9), 3-PIN SEALED CONNECTOR (10), TWO 3-PIN FEMALE
CONNECTORS (11), 1-PIN MALE CONNECTOR (12), AND SIX 1-PIN FEMALE CONNECTORS (13).
4-23
