TM 9-2320-363-34-1
8.
9.
10.
REMOVE TWO LOCK NUTS (12), TWO WASHERS (13), AND TWO BOLTS
TUBE BRACKET HALVES (15). DISCARD LOCK NUTS.
REMOVE TWO BOLTS (16) AND INLET OIL TUBE BRACKET HALVES
BLOCK (2).
(14) FROM
(15) FROM
INLET OIL
CYLINDER
C A U T I ON
Oil pump must be adequately supported to prevent pump from dropping when
retaining bolts are removed.
REMOVE TWO BOLTS (17), OIL INLET TUBE (18), AND GASKET (19) FROM OIL PUMP
ASSEMBLY (5). DISCARD GASKET.
3-201
