TM 9-2320-363-34-1
ACCESSORY DRIVE REPLACEMENT (CONT)
4.
TIGHTEN FIVE BOLTS TO 22-28 LB-FT (30-38 N.m) IN PATTERN SHOWN.
5.
USE DIAL INDICATOR WITH CLAMP BASE TO MEASURE GEAR LASH BETWEEN ACCESSORY
DRIVE GEAR AND BULL GEAR. POSITION DIAL INDICATOR TO READ BETWEEN SCRIBED LINES
(7) ON GEAR LASH CHECKER (8). GEAR LASH SHOULD BE 0.001-0.010 IN. (0.025-0.254 mm). IF
GEAR LASH DOES NOT MEET SPECIFICATIONS, ACCESSORY DRIVE MUST BE REPLACED.
NOTE
Follow-on Maintenance:
Install alternator belt (TM 9-2320-363-20).
3-128
